以下如有需要請(qǐng)致電13922125860（微信同步）

                 Dycotec Materials Products

 Silver

-Silver Conductive Inks and Pastes

DM-SIJ-3200

Low temperature nanosilver inkjet with excellent conductivity

DM-SIP-3061S

Screen printable, low temperature use for paper and plastic substrates

DM-SIP-3062S

Screen printable for transparent conductive oxide and glass substrates

DM-SIP-3063S

Screen printable thermoset for ultra high durability use

DM-SIP-3064S

R2R rotary screen printable for PV, RFID and sensors

DM-SIP-3065S

Screen printable for polyimide substrates for heaters and sensors

DM-SIP-3067S

Cost effective high performance silver screen printable for plastic substrates

DM-SIP-3100S

Syringe printable nanosilver high viscosity paste

DM-SIP-3101S

Screen printable nanosilver paste for plastic substrates

DM-SIP-3102S

High resolution screen printable nanosilver paste

DM-SIP-3105S

Low viscosity nanosilver paste for syringe printing

DM-SIP-3108S

Highly conductive nanosilver screen printable silver paste for thin film PV

 Copper

-Conductive Copper Inks and Pastes

DM-CUI-5002

Nanocopper inkjet, laser/flash-lamp use for rapid sintering

DM-CUI-5010

Nanocopper aerosol ink, laser/flash-lamp use for rapid sintering

DM-CUP-5054

Laser/flash-lamp sintered screen printable paste

DM-CUP-5056

Screen printable copper paste sintered using reducing gases

DM-CUP-5080

Nanocopper paste for fine line, sinter in reducing gases

DM-CUP-5100

Nanocopper paste for fine line, laser/flash lamp sinter

 Carbon

-Conductive Carbon Inks and Pastes

DM-CAP-4001S

Thermoset carbon paste (100 ?/□/25μm), high mechanical durability

DM-CAP-4010S

Thermoset carbon paste (1000 ?/□/25μm), high mechanical durability

DM-CAP-4311S

Single part screen printable carbon paste (<20 ?/□/25μm) for low temperature use

DM-CAP-4321S

Single part screen printable carbon paste (100 ?/□/25μm) for low temperature use

DM-CAP-4331S

Single part screen printable carbon paste (1000 ?/□/25μm) for low temperature use

DM-CAP-4511S

Thermoplastic, high conductivity (15?/□/25μm) carbon for flexible substrates

DM-CAP-4701S

For Perovskite Solar Cell use to produce highly conductive electrodes

 Overcoat

-Overcoat Inks and Pastes

DM-OC-6020S

Thermally cured, epoxy based screen printable protective overcoat

DM-OCI-6002

UV cured, epoxy based inkjet printable protective overcoat

 Graphene

-Conductive Graphene Inks and Pastes

DM-GRA-9001

Few layer conductive graphene inkjet printable ink

DM-GRA-9002

Single layer conductive graphene inkjet printable ink

DM-GRA-9003

Low temperature cured few layer conductive graphene inkjet ink

DM-GRA-9100S

Carbon-graphene hybrid screen printable paste for fine line printing

DM-GRA-9101S

High conductivity (10 Ω/□?/25μm) carbon-graphene hybrid screen printable paste

  Insulator

-Insulator Inks and Pastes

DM-INI-7003

UV cured epoxy based ultra-durable inkjet printable insulator

DM-IN-7010S

UV cured epoxy based screen printable insulator

DM-IN-7020S

Thermally cured epoxy based screen printable insulator 

Transparent Conductive

-Transparent Conductive

DM-SNW-8010S

Transparent conductive paste, high transparency and conductivity

 Conductive Adhesive

-Silver Conductive Adhesive

DM-AS-10000

Screen printed silver conductive adhesive

DM-AS-10001

Two part silver epoxy conductive adhesive low temperature use

DM-AS-10002

A silver epoxy based conductive adhesive that is used for thin film PV, sensors and general printed electronics applications

DM-SAS-10010

A silver polyurethane stretchable conductive adhesive that is used for wearables, IME and general printed electronics applications.

Thermally Conductive

-Thermally Conductive

TRIUMPH PCM-V100-SCP

specifically designed for easy use and storage. Maintains superior contact with components. Thermal resistance of <0.35°C-cm2/W. Thermal conductivity of 3.5 W/m.K, printable

 UV Reflective

-UV Reflective

DM-UVR-12001

Our UV reflective inks are based on the use of aluminium, which has exceptional UV reflectivity properties

DM-UVR-12100

 Our UV reflective inks are based on the use of aluminium, which has exceptional UV reflectivity properties.

Adhesive

-Dycotec Adhesive Products

DM-ADH-11001

A screen printable epoxy adhesive that is used for general printed electronics applications.

Stretchable

-Wearable Stretchable Conductive/Encapsulant

DM-ENC-2500

Screen printable stretchable encapsulation coating

DM-INS-2501

Screen printable stretchable insulator coating

DM-SIP-2001

Screen printable stretchable silver paste

 #DM-GRA-9003

Graphene Printing Ink

DM-GRA-9003 is a few layer graphene ink-jet printable conductive ink for applications such as sensors, heaters and barrier layers that can be processed at low temperature.

?No requirement for reducing atmosphere 

?Low temperature cure 

?Compatible with inkjet, spin-coat and spray deposition

 #DM-ENC-2500  

Encapsulant Paste           

DM-ENC-2500 is a screen printable encapsulation coating that is used in stretchable applications such as wearable devices, sensors and medical devices. The paste can be applied to elastomeric and textile substrates. The paste is cured at temperatures between 120-180?C.

 ?Low temperature sintering temperature (120-180?C)

?Stretchable

?Compatible with a wide variety of substrates

?Compatible with Dycotec Materials stretchable conductive pastes

Cure Temperature (oC): 120-200oC

Cure Time (mins): 10 mins

Adhesion: 5B

Hardness: 2B-5B

 #DM-SIP-2001

Silver Electronic Paste

DM-SIP-2001 is a screen printable silver paste that is used in stretchable applications such as wearable devices, sensors and medical devices. The paste can be applied to elastomeric and textile substrates.

?Low temperature curing temperature (120-200?C)

?Stretchable up to 140%

?Excellent electrical conductivity (<29 mΩ/ /mil)

?Compatible with a wide variety of substrates

?Compatible with Dycotec Materials stretchable encapsulation pastes (DM-ENC-2500)

Cure Temperature (oC): 120-200oC

Cure Time (mins): 10 mins

Drying Time (mins): 15 mins

Drying Temperature (oC): 60-80oC

Adhesion: 5B ASTM D3359

Hardness: 2B-5B